Starting an Automated Time Temperature Log

From the App Main Menu select "Time Temperature Logs" if this menu is missing please contact support.

You require your food items to be created first, if this is not done, you can't start the process.

Click here if you need to create food items.

You will see of sub menu appear below, select "Start New Time Temperature Log"

Select the TTL Type (we are going to select "Cooling" for this example)

There are master types already setup - but you could setup your own local TTL Types.

Please select your Food Category, Food Item & Sensor ID that you will be testing.

(Ensure you have food items added), you won't be able to proceed if no food items have been added).

The system will check if the Sensor ID has sent a read in the last few minutes, if not the process won't start. You can only use on Sensor ID per TTL, if you run a 2nd TTL process, the already select sensor can't be used.

After stating a process you can check the process by going to Currently Running Logs.

Any issues please contact support@sm8a.com.au