DLC-8 Fridge and Freezer Sensor
Using a PT100 temperature sensor, this is the preferred sensor for Fridges and Freezers.
Item | Feature |
Battery | Built-in 4000mAh/3.6V |
Measure Media | Ambient air |
Range of Temp Sensor probe | Temperature:-100℃ ~ +70℃ |
Accuracy of Temp Sensor | Temperature ±0.5℃ |
Operating Condition | -30℃~+60℃ |
RF Frequency | 915MHz |
Modulation | LoRa |
Transmit Power | 20dbm(adjustable) |
Maximum Range in Open Area | 2KM |
Transmit Interval | 5min-1440mins(user definable),default 15mins |
Low Voltage Alarm | NO (delivered via dashboard) |
Temp/RH Alarm | NO (delivered via dashboard) |
Stand-by Current | <5uA |
IP Level | IP54 |
Memory Capacity | 50000 |
Battery Life | 1 years (in 5mins interval) |
N.W. | 135g |
Dimension | 106mm*57mm*33mm |
NO | Function | Indication |
1 | LORA icon | LORA Sensor |
2 | Send icon | The device will flash when sending data,and then off |
3 | Temperature alarm icon | Normal:√ Alarm:× (Not Used) |
4 | Running status | ▷ Start running |
5 | Temperature icon | Upper limit:↑ Lower limit:↓ Upper Lower limit:↑↓ |
6 | RSSI signal icon | :[-80,0]; :[-100,-80]; :[-115,-100]; :[-125,-115]; :[-138,-125]; The RSSI value is updated every time the gateway response after receiving the data, so the RSSI value is not displayed,if you don't turn on ACK or no response |
7 | Battery status | :[3.2,3.6]; :[3.0,3.2]; :[2.8,3.0]; : [2.5,2.8]; |
8 | Temperature Read - (not live read, updates every read taken). | Display Temperature in Celsius, if shows - - - - - - there is error. |
9 | Function Not Used | Function not used |