GW-2 Network Gateway

These Hubs are configured from the Factory with and do not need any extra configuration by the client.

Connection is Ethernet (RJ45) by default.

WiFi (2.4)only, is available but needs to be configured before shipment.

If you are having any issues with the gateway, please contact support@sm8a.com.au

Support will ask for the IMEI number on the bottom of the device.


These devices are remotely managed with our software platform.

These devices only need Power and an internet connection to operate, basically set and forget devices.


RED Power LED: If this light is off, the unit is running on Internal battery power. (Max 5-6 Hours).

Green Net LED: Flashes when sending data.

RF LED: Flashes Blue when sending and receiving data from sensors.

LED Lights
LAN & Power
Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.